Orlando |
Code of Ordinances |
Chapter 58. ZONING DISTRICTS AND USES |
Part 5. ACCESSORY USES AND STRUCTURES |
Appendix 5B. SPECIFIC ACCESSORY USES AND STRUCTURES |
Appendix 5. REFUSE AND RECYCLING DISPOSAL CONTAINERS |
§ 58.952. Refuse Service Types.
Siting, access and screening requirements for one or more type of service described in this section shall be provided by the property owner for each service location, and shall be inspected and authorized by the Solid Waste Management Bureau or its designee. The service types are:
F.E.L. (Front End Loaded) Refuse Container Service: Shall be provided by the City when the anticipated refuse volume, service access, siting and screening requirements are met by the property owner and when this type of service is selected by the property owner as the desired type. The City shall continue to service existing F.E.L. containers constructed according to approved plans, however such containers shall come into compliance with location and screening requirements as part of any substantial enlargement or substantial improvement.
Roll-Off Compactor Service: Shall be provided by any of the currently authorized City Franchisees when the anticipated refuse volume, service access, siting and electrical requirements are properly provided by the property owner and when this type of service is selected by the property owner as the desired type.
Commercial Hand Pickup/Garbage Cart Service: Shall be provided by the City upon the recommendation of the City Solid Waste Management when anticipated refuse volume and efficiency of service so indicates.
Recycling Service: All recycling containers (F.E.L., Commercial Hand Pickup/Cart, or Roll-Off) shall conform to the same requirements as corresponding type refuse containers.
(Ord. of 9-16-1991, Doc. #25094; Ord. of 4-20-1992, Doc. #25633; Ord. of 5-20-1996, Doc. #29361; Ord. No. 2019-8 , § 1, 3-11-2019, Doc. #1903111201)