§ 64.226. Signs in O-1, O-2 and O-3 Districts.

Signs shall be allowed in the O-1 and O-2 office districts as follows:

Sign Area in O-1 District. A total sign area of one (1) square foot for each four (4) lineal feet of primary building frontage, up to a maximum of twenty-four (24) square feet shall be allowed.

Where an office or O-1 district shares a block face with a residential district and/or where the opposite block face contains a residential zoning district, the nameplates and directory signs only shall be permitted in accordance with the following standards:

a.

Single Office: One (1) nameplate or directory sign not to exceed four (4) square feet in area.

b.

Two or Three Offices: One directory sign not to exceed six (6) square feet in area and one nameplate not to exceed four (4) square feet in area.

c.

Four or More Offices: One directory sign not to exceed eight (8) square feet in area and one nameplate not to exceed four (4) square feet in area.

Sign Area in O-2 District. A total sign area of one (1) square foot for each two (2) lineal feet of primary building frontage, up to a maximum of forty-eight (48) square feet shall be allowed.

Sign Area in O-3 District. A total sign area of one (1) square foot for each one (1) lineal foot of primary building frontage up to a maximum of 72 square feet.

Location and Height. Ground, pole, and projecting signs shall not be located in the front fifty (50) percent of any required front yard, shall be set back at least fifteen (15) feet from any adjoining property, and shall not exceed six (6) feet in height in the O-1 District; eight (8) feet in height in the O-2 District, or ten (10) feet in the O-3 District.

DIAGRAM "A" - POINTS OF MEASURE FOR DISTANCE BETWEEN BILLBOARDS

DIAGRAM "B" - LOCATIONS OTHER THAN AT INTERSECTION

DIAGRAM "C" - INTERSECTIONS